mobile logo

Posts in Restoration

29
Nov
featured image

AGI’s Flood Damage Restoration Program

posted on November 29, 2017 / IN Restoration / 0 Comments

Water damage, whether caused by heavy storms, flash floods, hurricanes, or leaky pipes, can range from mild to severe. The longer building materials or goods are exposed to wet conditions, the more potential there is for deadly mold and mildew to develop, and the more hazardous the situation becomes.

Read more
26
Oct
featured image

Restoration of Air Duct System

posted on October 26, 2017 / IN Restoration / 0 Comments

After a fire, smoke, soot and odors can linger and further damage your premises and threaten your health. Damaging smoke and soot spreads to other rooms in your premises through the airduct system and settles within the ductwork.

Read more
14
Oct

Scope Fogging

posted on October 14, 2016 / IN Restoration / 0 Comments

Fire Incident caused by an air conditioner in Petaling Jaya, Malaysia. Smoke and Soot contaminated the client’s content, electrical & electronic appliances, ceiling, walls and hard floor. Whole area was affected by smoke and soot.

Read more
14
Oct

NEW LIFE After Restoration

posted on October 14, 2016 / IN Restoration / 0 Comments

A fire and the smoke contamination that follows can be devastating. We work to quickly assess the damage and define what can be remedied and restored. We then proceed with the correct, most cost-effective course of action to repair and prevent future damage.We use a range of leading-edge technology to restore both the property and its contents.

Read more
14
Oct
featured image

Dehumidification Process

posted on October 14, 2016 / IN Restoration / 0 Comments

The basic functional principle of drying dehumidifier is really quite simple. A fan draws in humid air and carries it through a refrigerated evaporator. The air is cooled well below its dew point. The water condenses on the cold surface of the evaporator and drips into a water container or is led directly to a drain. Then the cold dry air continues through a hot condenser which heats it up and returns it to the room to pick up new humidity. This procedure is continued until the desired condition is achieved.

Read more